available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 4328909 (800) 4116596 +44 2392232392 model c 333 7 j 5003a hf rev a ultra low profile 0805 3 db, 90 hybrid coupler description the C3337J5003AHF is a low cost, low p rofile subminiature high performance 3 db coupler in an easy to use surface mount package. it is designed for wimax and wibro applications. the C3337J5003AHF is ideal for balanced power and low noise amplifiers, plus signal distrib ution and other applications where low insertion loss and tight amplitude and phase ba lance are required. the C3337J5003AHF is available on tape and reel for pic k and place high volume manufacturing. all of the xinger components are const ructed from ceramic filled ptfe composites which possess excellent electrical and m echanical stability having x and y thermal coefficient of expansion (cte) of 17 ppm/ o c detailed electrical specifications: specifications subject to change without notice. room (25 c) parameter min. typ. max unit frequency 3300 3700 mhz port impedance 50 return loss 15 18 db isolation 18 22 db insertion loss* 0.2 0.3 db amplitude balance 0.3 1.0 db phase balance (relative to 90) 3 7 degrees power handling 4 watts features: ? 3300 C 3700 mhz ? 0.7mm height profile ? wimax and wibro applications ? high isolation & low loss ? surface mountable ? tape & reel ? non-conductive surface ? rohs compliant ? halogen-free operating temperature 55 +85 oc * insertion loss stated at room temperature (insert ion loss is approximately 0.1 db higher at +85 oc) outline drawing mechanical outline dimensions are in inches [millimeters] tolerances are noncumulative .049 .004 [1.25 0.10 ] .079 .004 [2.00 0.10 ] 1 2 3 6 5 4 bottom view (farside) side view top view (nearside) .027 .002 [0.68 0.05 ] 6x .009 [0.22] 6x .012 [0.30] pin 36 12 4 5 designation input gnd isolated direct gnd coupled orientation marker denotes pin location orientation marker denotes pin location 4x .026 [0.65] .039 [0.98]
usa/canada: toll free: europe: (315) 4328909 (800) 4116596 +44 2392232392 available on tape and reel for pick and place manufacturing. model c 3337j 5003ahf rev a typical broadband performance: 500 mhz. to 6000 mhz . return loss - input 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 500 1000 1500 2000 2500 3000 3500 4000 4500 5000 5500 6000 frequency [mhz] [db]
available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 4328909 (800) 4116596 +44 2392232392 model c 333 7 j 5003a hf rev a typical performance: 3200 mhz. to 3800 mhz. return loss - input 36 33 30 27 24 21 18 15 12 9 6 3 0 3200 3300 3400 3500 3600 3700 3800 frequency [mhz] [db] insertion loss 3.6 3.3 3.0 2.7 2.4 2.1 1.8 1.5 1.2 0.9 0.6 0.3 0.0 3200 3300 3400 3500 3600 3700 3800 frequency [mhz] [db] amplitude balance 2 1.5 1 0.5 0 0.5 1 1.5 2 3200 3300 3400 3500 3600 3700 3800 frequency [mhz] [db] phase balance 20 15 10 5 0 5 10 15 20 3200 3300 3400 3500 3600 3700 3800 frequency [mhz] deg isolation 36 33 30 27 24 21 18 15 12 9 6 3 0 3200 3300 3400 3500 3600 3700 3800 frequency [mhz] [db]
usa/canada: toll free: europe: (315) 4328909 (800) 4116596 +44 2392232392 available on tape and reel for pick and place manufacturing. model c 3337j 5003ahf rev a mounting configuration: in order for xinger surface mount components to wor k optimally, the proper impedance transmission line s must be used to connect to the rf ports. if this condition is not satisfied, insertion loss, isolation and vs wr may not meet published specifications. all of the xinger components are constructed from c eramic filled ptfe composites which possess excelle nt electrical and mechanical stability having x and y thermal coe fficient of expansion (cte) of 17 ppm/ o c. an example of the pcb footprint used in the testing of these parts is shown below. in specific design s, the transmission line widths need to be adjusted to the unique dielectric coefficients and thicknesses as well as varying pick and place equipment tolerances. mounting footprint dimensions are in inches [millimeters] .026 [0.66] 6x .013 [0.33] 4x .012 [0.30] plated thru holes to ground circuit pattern footprint pad (s) solder resist 6x .014 [0.35] 6x .002 [0.05] 4x transmission line
available on tape and reel for pick and place manufacturing. usa/canada: toll free: europe : (315) 4328909 (800) 4116596 +44 2392232392 model c 333 7 j 5003a hf rev a packaging and ordering information parts are available in reel and are packaged per ei a 4812. parts are oriented in tape and reel as sh own below. minimum order quantities are 4000 per reel. see model numbers be low for further ordering information . b ?a ?c reel dimensions (inches [mm]) ?a b ?c 0.32 [8.0] 2.0 [50.8] 7.00 [177.8] 4000 quantity/reel table 1 ?d 0.512 [13.0] ?d
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: anaren: ? C3337J5003AHF
|
